1. PRIMER QUIK 3 2. RESINA TX 300 3. MICROMETALLO BRONZO 4. ROLLER 5. FO-20M006/----- 1. Apply Primer Quik 3 to the MDF board with a roller . Dry for 1-2 hours. 2. Apply Resin TX 300 mixed with Micrometallo Bronzo. Immediately after application, make an impression with a rubber roller. After 16-20 hours of drying, sand gradually from coarser to finer papers 320, 600, 1000, 2000, in order to achieve a metallic effect. 3. Apply topcoat FO-20M006. Dry for 24 hours.

1. JL---M070/----- 2. JO-03M077/----- 1. Wood veneer base sanded with 180 grit paper. Spray two coats of JL — M070 with an interval of 8 hours and sand with 320 grit sandpaper. After the second layer, dry for 12 hours and lightly sand with 320 grit paper. 2. Apply JO-03M077. Dry for 24 hours.

1. PL---M005/--C01 2. FB---M066/CS045 1. MDF board base. Apply two coats of PL-M005 / -C01 by spraying. Spacing between layers of 8 hours and sand with 320 grit paper. After the last layer, dry for 8 hours and sand with 320 grit paper. 2. Apply the final gloss varnish FB — M066 / CS045. Dry for 48 hours. Polish if needed.

1. FL---M042/--C01 2. FO25M060/CS105 1. MDF board base. Apply two coats of  FL — M042 / -C01 by spraying. Spacing between layers of 12 hours and sand with 320 grit paper. After the last layer, dry for 12 hours and lightly sand with 320 grit paper. 2. Apply matt varnish FO-25M060 / CS105. Dry for 24 hours.