1. FL—M042/–C02
2. METALLO FUSO 05
3. ROLLER
4. JO-25M070/—–
1. MDF board base. Apply two or three coats of FL — M042 / -CO2 by spraying. Spacing between layers of 12 hours and sand with 320 grit paper. After the last layer, dry for 12 hours and light sanding with 320 grit paper.
2. Apply the Metallo Fuso 05 Ferro effect. Immedieatly after press with a rubber roller make an impression. After 16-20 hours of drying, sand gradually from coarser to finer papers 320, 600, 1000, 2000, in order to achieve a metallic effect.
3. Apply JO-25M070. Dry for 24 hours.